7" Round Custom DRL Headlight (Cross) - PRESALE
!!!THIS IS A PRESALE!!! If you purchase a light, the delivery date is estimated to be July, 2021, to allow for manufacturing and delivery. You will receive updates via email on the status of the production run.
7" round headlight with white LED cross daytime running light (DRL).
The way motorcycles are wired, the headlight is always on. In order to have only our custom designed DRL light up during the day, the projector light is hooked to a photoelectric switch so the actual headlight only comes on in the dark. This way the bike still has the ability to ride with low beams or high beams without needing to add a separate switch. The DRL + wire on the prototype has been produced with the wire separate from the H4 headlight plug; all you have to do is slide the wire inside the positive end of the plug and you're ready to go!
Installation instructions:
1. Remove any exterior trim or frames that surround the headlight
2. Remove the headlight from the aiming mechanism –
2a. Some bikes require only 3 screws to remove the retaining ring that holds the light.
2b. Some require removal of the entire aiming mechanism from the bike before removing the 3 screws. This involves removing a spring-clip and the aiming screws.
3. Remove and unplug the original light.
4. Plug in your new Displaced Motors headlight.
4a. Your Displaced Motors headlight comes with a separate power wire for the Daytime Running Light (DRL). If you want your light on all the time, you must connect this white wire to a constant power source on your bike.
4b. If you don't mind the DRL turning off when you have the high-beams on, stick the white connector into the back of the H4 connector with the blue wire.
5. Align the tabs on the back of your headlight with the indentations on the headlight retaining ring.
6. Replace the retaining screws and/or aiming mechanism.
7. Replace all body trim and/or frames that surround the headlight.
Specifications
Low Beam- 2 amp @12v DC
High Beam- 2.25 amp @ 12v DC
DRL - .25 amp @ 12v DC
LED Projector Low Beam Wattage: 25W
LED Projector High Beam Wattage: 30W
LED Projector Low Beam Lumens: 1800lm
LED Projector High Beam Lumens: 2800lm
Color Temperature: 5500K – 6000K
Low Beam – 5500 Kelvin
High Beam- 5500 Kelvin
DRL- 6000 Kelvin
Warranty Period: 1 Year